IW 2 LON
Roller brake tester for cars, vans and light trucks up to 8,800 lbs axle load
The IW 2 LON brake tester is used as the basic module for the testing lane. All measurement values can be clearly displayed on the analogue display with braking force difference display and assessed. The automatic test procedure with display enables a rapid diagnosis of the complete vehicle. Particularly suitable for reception and diagnostics lanes; exceeds the requirements for the main inspection, has a PC interface and is thus network-compatible.
Standard equipment
- multifunctional analogue display for measurement values of brake tester, shock absorber tester and side slip tester including switching elements (motor protection switch, relay or necessary switchgear depending on the connected device)
- braking force difference display optic
- lockable main switch
- RS 232 interface connection for printer or PC
- electronic start-up monitoring and roller exiting aid
- single wheel switchover, delayed automatic startup
- automatic shut-off after exiting the test stand
- automatic cutoff at selected slip with measured value display and automatic restart
- electronic DMS strain gauge measuring system
- self-supporting, enclosed roller set IW 2 RS 2
- roller surface optionally welded or plastic-coated
- electro-static powder paint: blue, RAL 5010
Documents
Technical Data
Pictures
| Standard Power Supply | 208/230V 3-Phase 50 Hz |
| Axle load | up to 8,800 lbs |
| Display case dimensions (H x W x D) | 24.8 x 34.3 x 9.4 inches |
| Interface connection | RS 232 for DIN A4 printer or PC |
| Main switch fuse | 25 A delayed action |



_rdax_100x75_80.jpg)


